No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
SI TECH There are 72 products.
Subcategories
-
Sitech Silicone Neck Seal Sitech Silicone Neck Seal
22,95 € incl. VAT
27,00 € -15%
18,97 € excl. VATReduced price!Available -
Sitech Skeleton inflation valve Sitech Skeleton inflation valve
Two options available 21780 ref.: hight push button 21730 ref.: low profile botton Two options available 21780 ref.:...
56,10 € incl. VAT
46,36 € excl. VATAvailable -
-
Sitech Slide inflation valve Sitech Slide inflation valve
The Slide Inflation Valve is a high performance valve suitable for all areas of recreational and technical diving. The design of the housing makes it easy to locate and the slide button ables the diver to inflate a smooth flow of gas and fully control the buoyancy. The construction of the filter lid makes the Slide Inflation Valve suitable to use in... The Slide Inflation Valve is a high...
56,40 € incl. VAT
46,61 € excl. VATAvailable -
Sitech String Dump Valve Sitech String Dump Valve
Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut. Spring loaded Dump Valve with twin...
32,10 € incl. VAT
26,53 € excl. VATAvailable -
Sitech Thetis exhaust valve Sitech Thetis exhaust valve
56,10 € incl. VAT
46,36 € excl. VATAvailable -
Sitech Valve Attachment Tool (1 unit) Sitech Valve Attachment Tool (1 unit)
Valve Attachment Tools are recommended to enhance the grip when detaching and/or reattaching SI TECH valves and Blanking plug. Note! Sold in pcs, not a pair. Two pcs are needed for most valves. Valve Attachment Tools are...
8,90 € incl. VAT
7,36 € excl. VATAvailable -
Sitech Weld nut Sitech Weld nut
This Weld nut is intended for welded attachment of valves. The Weld nut demands an O-ring for proper sealing properties. (O-ring item no: 80088 included.) TECHNICAL SPECIFICATION PU Outer diameter: 64 mm Inner thread: M33 x 1,5 Fits all SI TECH valves Note: the color could be black or translucent white. The two sides of the port are shown,... This Weld nut is intended for welded...
11,04 € incl. VAT
9,12 € excl. VATAvailable -
Sitech, Anti-friction washer Sitech, Anti-friction washer
Anti-friction washer for Inflation and Exhaust Valves. TECHNICAL SPECIFICATION Outer diameter: 64 mm Inner diameter: 33,5 cm For all Inflation and Exhaust Valves Anti-friction washer for Inflation...
2,95 € incl. VAT
2,44 € excl. VATAvailable -
Sitech, external rubber valve port Sitech, external rubber valve port
External Valve port for attachment to trilaminate- and rubber drysuits. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves NOTA: La imagen muestra las dos caras del asiento, el precio mostrado corresponde a un asiento. External Valve port for attachment to...
11,04 € incl. VAT
9,12 € excl. VATAvailable -
Sitech, external valve port 75mmø Sitech, external valve port 75mmø
This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves This Valve port can either be glued...
8,06 € incl. VAT
6,66 € excl. VATAvailable -
Sitech, external valve port 85mmø Sitech, external valve port 85mmø
This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves This Valve port can either be glued...
8,06 € incl. VAT
6,66 € excl. VATAvailable -
Sitech, External Valve port with flange Sitech, External Valve port with flange
External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange... External Valve port for attachment to...
11,04 € incl. VAT
9,12 € excl. VATAvailable -
Sitech, Inner Glove, Kleven Sitech, Inner Glove, Kleven
Kleven Inner glove is a thin and flexible inner glove with very good thermal capability. Knitted with polyester hollow fiber (97 %) and spandex (3 %). Advanced materials and deliberate design ensures the best heat insulation and a faster drying time than comparable materials. Short cuff. Tight around the wrist (low risk of getting stuck in locking... Kleven Inner glove is a thin and...
11,00 € incl. VAT
9,09 € excl. VATAvailable -
Sitech, Internal Valve Port Sitech, Internal Valve Port
Internal valve port used in the installation of Sitech valves. Internal valve port used in the...
4,31 € incl. VAT
3,56 € excl. VATAvailable -
Sitech, ORUST neck ring Sitech, ORUST neck ring
Neck Ring for the ORUST Neck system. Neck Ring for the ORUST Neck system.
28,38 € incl. VAT
23,45 € excl. VATAvailable -
Sitech, ORUST Neck System Sitech, ORUST Neck System
ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. ORUST Neck System is the third...
71,99 € incl. VAT
59,50 € excl. VATAvailable -
Sitech® LIANA Sitech® LIANA
LIANA is a user friendly and versatile squeeze-on Dry Glove system. SLÄGGÖ Flex Ring works as attachment platform for LIANA. Don by squeezing. Doff by turning the release ring with one hand. Benefits User friendly Self supported Accomodating most hands Sturdy construction. LIANA is a user friendly and...
118,11 € incl. VAT
137,34 € -14%
97,61 € excl. VATReduced price!Available -
Sitech® OBERON Sitech® OBERON
OBERON is a round Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. OBERON is an easy to use Dry Glove System, designed to perform - no matter the diving environment. OBERON Dry Glove System is a bayonet system that is easy to lock and release. OBERON is a round Dry Glove System...
105,75 € incl. VAT
137,34 € -23%
87,40 € excl. VATReduced price!Available -
SLÄGGÖ Flex Ring SLÄGGÖ Flex Ring
SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation SLÄGGÖ Flex Ring is a flexible...
66,00 € incl. VAT
54,55 € excl. VATAvailable -
Spanner Ring for SITECH SLÄGGÖ Spanner Ring for SITECH SLÄGGÖ
7,90 € incl. VAT
6,53 € excl. VATAvailable -
Virgo & Glove Lock QCP, Ring Virgo & Glove Lock QCP, Ring
Ring spare part. This ring is used in the dry glove systems Virgo and Glove Lock QCP Ring spare part. This ring is used in...
9,41 € incl. VAT
7,78 € excl. VATAvailable -
VIRGO & Glove Lock Spanner ring VIRGO & Glove Lock Spanner ring
These spanner rings fits with your VIRGO and Glove Lock dryglove systems. There are four different sizes of spanner rings: The Yellow one is the more thin: for thicks gloves (ref. 60535) The Blue is a bit more thick: for medium gloves (ref 60536) The Green one, a bit more thick: for medium plus gloves (ref 60537) And the Red, the thickest: for thin... These spanner rings fits with your...
4,60 € incl. VAT
3,80 € excl. VATAvailable -
VIRGO, Sitech VIRGO, Sitech
VIRGO is a round Dry Glove System that connects with the PU-Ring of QCS Oval. It provides the recreational diver with an easy to mount, easy to use Dry Glove System, designed to performe - no matter the diving environment. The VIRGO Dry Glove System can be used together with a great variety of dry gloves. VIRGO is a round Dry Glove System...
105,99 € incl. VAT
87,60 € excl. VATAvailable
