The kit consists of all the O-Rings, filter and piston seat necessary to be replaced.Suitable for first DIN and INT stages NOTE: the maintenance of the regulators must be carried out by duly qualified personnel, otherwise there is a great danger of equipment malfunction with the obvious dangers arising from this situation. The kit consists of all the O-Rings,...
O-ring for M26 connection of Apeks 1st stages. O2 Clean It can be used in first stage DIN M26 connections from other brands, for this it is recommended to check measurement compatibility. Dimensions: Outside diameter 19mm Section: 2,5mmø O-ring for M26 connection of Apeks...
An upgrade kit with the DST (XTX50) First stage of Apeks can be extended by a further means pressure outlet. This is then located on top of the rotary distributor block, allowing an even better hose configuration. In this kit, all seals, as well as an illustrated manual (English) are included. An upgrade kit with the DST (XTX50)...
Maintenance kit for 1st stage Apeks´s regulators. The first stages Apeks Flight and Status use another service kitNot compatible with O2 In order to access to the maintenance kits and, consequently, to be able to manipulate and repair diving regulators, it is essential to have taken official training as a technician in regulator handling.Keep in mind... Maintenance kit for 1st stage Apeks´s...
Valve seat cover O-ring. The number 16 of the attached photo Valve seat cover O-ring. The number...
HP No.17 O-Ring used in the general HP Balance Plug HP No.17 O-Ring used in the general...
HP No.16 gO-ring used for the valve HP No.16 gO-ring used for the valve
HP O-Ring No.12 used in some different parts of the Apeks 1st stages. It is used in the DIN and INT connection inlet, in the removable valve seat, in the HP outlet plugs and HP hoses with 7/16 "connection and in the Balance Plug where the valve seats. HP O-Ring No.12 used in some...
This is the Apeks 1st stage silicone hydrostatic diaphragm used ta the dry chamber, common for all Apeks first stage models. This is the Apeks 1st stage silicone...
Apeks O-Ring for DIN connection. Also could fit with DIN connections of other brands. Please, check its measures before... 15,7mm outer diameter X 2,6mmø Apeks O-Ring for DIN connection. Also...
Maintenance kit for the 2nd stage Apeks regulators. Not O2 Clean In order to access to the maintenance kits and, consequently, to be able to manipulate and repair diving regulators, it is essential to have taken official training as a technician in regulator handling.Keep in mind that this element is responsible for supplying us with vital gas under... Maintenance kit for the 2nd stage...
Maintenance kit for 1st stage Apeks DST STATUS Not O2 compatible In order to access to the maintenance kits and, consequently, to be able to manipulate and repair diving regulators, it is essential to have taken official training as a technician in regulator handling.Keep in mind that this element is responsible for supplying us with vital gas under... Maintenance kit for 1st stage Apeks...
Maintenance kit for 1st stage Apeks FLIGHT Not O2 compatible In order to access to the maintenance kits and, consequently, to be able to manipulate and repair diving regulators, it is essential to have taken official training as a technician in regulator handling.Keep in mind that this element is responsible for supplying us with vital gas under... Maintenance kit for 1st stage Apeks...
In order to access to the maintenance kits and, consequently, to be able to manipulate and repair diving regulators, it is essential to have taken official training as a technician in regulator handling.Keep in mind that this element is responsible for supplying us with vital gas under water. Incorrect manipulation could cause death. In order to access to the maintenance...
his is the Apeks 1st stage diaphragm, common for all Apeks first stage models. his is the Apeks 1st stage diaphragm,...
Dry chamber kit for the 1st stage Aqualung Core NOTE: In order to access to the maintenance kits and, consequently, to be able to manipulate and repair diving regulators, it is essential to have taken official training as a technician in regulator handling.Keep in mind that this element is responsible for supplying us with vital gas under water.... Dry chamber kit for the 1st stage...
Kit to upgrade the 1st Legend DIN (pre 2012 version) stage to a 1st Legend DIN with the ACD system CLICK HERE TO KNOW MORE ABOUT THE ACD SYSTEM Kit to upgrade the 1st Legend DIN...
Seat for Aqualung's unbalanced second stages Seat for Aqualung's unbalanced second...
Kit to upgrade the 1st Calypso stage to a 1st Calypso with the ACD system CLICK HERE TO KNOW MORE ABOUT THE ACD SYSTEM Kit to upgrade the 1st Calypso stage...
Kit to upgrade the 1st Legend 2 YOKE (new 2012 version) stage to a 1st Legend 2 DIN with the ACD system CLICK HERE TO KNOW MORE ABOUT THE ACD SYSTEM Kit to upgrade the 1st Legend 2 YOKE...
Kit to upgrade the 1st Titan-Mikron YOKE (new 2012 version) stage to a DIN version with the ACD system CLICK HERE TO KNOW MORE ABOUT THE ACD SYSTEM NOTE: the picture could not match exactly with the real kit. Its only as an example. Kit to upgrade the 1st Titan-Mikron...
Kit to update the 1st stage Aqualung Calypso YOKE to DIN version This conversion kit is intended to convert Calipso YOKE regulators P/N 125730, 125750, 125810. Earlier models of Calipso, along with Club, Ranger and Aquarius can not be converted using this kit. NOTE: In order to access to the maintenance kits and, consequently, to be able to manipulate... Kit to update the 1st stage Aqualung...
Kit to upgrade the Titan LX 2009-2012 INT version to the DIN version with the ACD system CLICK HERE TO KNOW MORE ABOUT THE ACD SYSTEM Kit to upgrade the Titan LX 2009-2012...